120 insulating sheath extrusion production line

Description

120 insulating sheath extrusion production line

A.Equipment Application

Theunit comfortable soft PVC,such as poly(PVC thermoplastic,by hot press method to be extruded insulation or sheath wire conductor laer coated.

B.The line Derection

In the face of the nose left put right.

C.Production line to the requirement of working environment

Temperature:0-45 degrees
Power supply:three-phase 380 plus or minus 10%,50 hz with neutral wire.

D.Main technical parameters

The screw diameter120kg
The screw length to diameter ratio25:01:00
Extrusion sheath outside diameterφ30~80mm
Maximum traction1600kg
The production line speed>60m/min
Steel specificationPN1250-PN2500
The line plate specificationPN1250-PN2500
Equipment center high1000mm

E.Equipment Composition

φ2500 end of shaft motorized1 sets of
Five rounds of tensioning device1 sets of
SJ-120×25 plastic extruder1 sets of
Automaic drying feeding device1 sets of
φ80 square sheathed the nose1 sets of
φ 40 co-extrusion head and vacuum device1 only
Cable blow dry device1 set
TQD-1600kg crawler type pneumatic tractor traction after1 set
φ 2500end shaft line fram1 sets of
Electrical control and synchronization control system1 sets of

Reviews

There are no reviews yet.

Be the first to review “120 insulating sheath extrusion production line”

Your email address will not be published. Required fields are marked *