Description
Product Description
Application:The machine is suitable for hot extrusion of PVC、 PE \XLPE etc. plastic material, for insulation of conductor or sheathing of cables.
Operation Direction: Facing the cross head, pay off is at left side, take up is at right side.
Requirement for Production Line Working Environment:
Temperature:0~45 ℃
Power supply:3 phase 380±10%, 50 Hz with neutral wire.380±10%,50Hz
Power supply:3 phase 380±10%, 50 Hz with neutral wire.380±10%,50Hz
Specification
Maximum sheathing OD
|
40mm
|
production range
|
1mm~3mm
|
Production line speed
|
10~100m/min
|
Max. extrusion output capacity
|
550kg±5%/h PVC
|
Maximum haul off force
|
1600kg
|
Pay off reel size
|
PN1250~PN2250
|
Take up reel size
|
PN1250~PN2250
|
Main Parameters
SJ-100×25 Plastic Extruder
Screw diameter : φ100mm
Screw material : 38CrMoAlA
L/D ratio : 25:1
Screw type : BM
Motor : 110kw Siemens beide AC frequency motor 110KW
Heating capacity : 30KW,
Heating temperature: 0~ 300℃
Machine center height : 1000mm
Maximum output: 550 Kg/h (calculated for PVCsheathing material).
Cooing method: Feeding Zone – Water Cooled,barrel is air cooled
Connected with cross head by flange.
Screw material : 38CrMoAlA
L/D ratio : 25:1
Screw type : BM
Motor : 110kw Siemens beide AC frequency motor 110KW
Heating capacity : 30KW,
Heating temperature: 0~ 300℃
Machine center height : 1000mm
Maximum output: 550 Kg/h (calculated for PVCsheathing material).
Cooing method: Feeding Zone – Water Cooled,barrel is air cooled
Connected with cross head by flange.
Reviews
There are no reviews yet.