Description
150+90+45 composite submarine cable extrusion production line
A.Equipment Application
This machine adopts the series method,the series method,the length of thr various specificationa,large submarine cable insulation,sheath coated,Extrusion materials including:soft PVC,PVC,etc.
B.The production line to the requirement of working environment:
Temperature:0-45 degrees
Power supply:three-phase 380 plus or minus 10%,50 hz with neutral wire.No impulse voltage,interference.
C.Main Technical parameters
| The screw diameter | 150mm / 90mm / 45mm |
| The screw length to diameter ratio | 25:01:00 |
| After sheath outside diameter | φ6~60mm |
| Maximum traction | 3200kg |
| The production line speed | >45m/min |
| Steel specification | PN1600-PN3150 |
| The line plate specification | PN1250-PN2500 / PN2000-PN4500 |
| Equipment center high | 1000mm |
| Production line direction | In the face of the nose left put right |
D.Equipment Composition
| LF1250/2500 gantry rail walking type of passive motorized | 1 set |
| LF2000/4500 roller,passive motorized gantry rail to walk | 1 set |
| TQD-1250kg crawler type pneumatic tractor traction before | 1 set |
| SJ-150X25 plastic extruder | 1 set |
| SJ-90X25 plastic extruder | 1 set |
| SJ-45X25 plastic extruder | 1 set |
| Automaic drying feeding device | 1 sets of |
| square sheathed the nose | 3 only |
| 4m mobile temperature+16m+60 colling heating sink | 1 sets of |
| Cable blow dry device | 1 set |
| TQD-1250kg crawler type pneumatic tractor(drawing)after | 1 set |
| TQD-3200kg crawler type pneumatic tractor(traction after optional) | 1 set |
| LSP2000/3600 gantry rail line frame | 1 sets of |
| Electrical synchronization control system | 1 sets of |
